If you wish to make the most out of a storage heater, than it is necessary to be on an Economy 7 tariff, which is something that not many people really know how to use to their advantage, or to use at all! Unfortunately, this ends up with these people having to charge their heaters at the wrong time. Many people don’t really understand the storage heaters, and they ought to find a way to do so, and the best one is visualizing the heaters as one big rechargeable battery. This is because the heaters need to be charged before the energy that is contained within them could be discharged.
If you have an Economy 7 tariff, you will get the electricity supplied to you in two different ways and rates. The first one is the expensive electricity, also known as the “peak time” electricity, and the other one is the cheap electricity, also called the “off peak”. So, obviously, the best way to recharge your heater is to use the cheap electrical energy, but the problem with this lies in the fact that the cheap power is only available during the night, and in the deepest time during the night – from midnight to 7 am.
Do These Storage heaters Leak Heat?
These things are a bit different to batteries that manage to retain all the charge until it becomes necessary to use it, these storage heaters almost instantly start to leak heat, and the more the heater manages to retain the hit within itself, the better it is. It will also cost more, but will at the same time save you a lot of money.
Basically, these storage heaters lose most of their stored heat during the first 12 hours. The good news is the fact that this could be mitigated a bit by having a well insulated home; that way there’ll be no way for the heat to leave the home, which is a good thing, But, the homes without an insulation are still going to have a problem.
Setting up Storage Heater Controls
All the people interested in this need to know that the most of these storage heaters usually have two controls. The first one of them includes the power switches which determine what kind of a rate of electrical power you’re going to use. The second one includes the input and output controls, which determine how much electricity the storage heater is going to use and the rate by which the heat gets emitted into the room by the heater, Smartly Heated advise.
In order to manage and run these heaters in the most efficient way possible, which is also the cheapest way, you first need to make sure that you use the cheaper electrical power, which has already been described above. Only use the more expensive power if it is absolutely necessary and the cheap power just can’t raise the temperature. When the winter comes, the input should also be raised to the maximum in order to allow the power to come to the heater. In the summer, you can lower the input levels, or turn it off entirely! If you turn the output all the way up, your heater will start emitting the heating rather early, which could result in having no heat in your home by the time the late afternoon comes. However, try to turn the output to zero when you’re not home or when you sleep, because you’d just be wasting heat otherwise.
Solar PV and Storage Heaters
Some people were wondering if it’s possible to get the power for the storage heater straight from their solar panel. They’ve been wondering if this was possible, and if it would help lower the cost. And the answer is a bit complicated.
The first thing that needs to be said here is that people use heating a lot more during the Winter, and during that time of the year, your solar panels aren’t really producing that much power due to the fact that there really isn’t any sunlight. The storage heaters require a large amount of electricity, and therefore, this is not a great idea.